low budget 1w TV PLL transmitter

Product Information

FIRST VERSION (dip switches) Available for VHF OR UHF, depending on the version you want

+-1W Ultra-Pro economical TV Transmitter used as a first exciter by many of the most prestigious community TV stations in the world because of its high frequency precision and clear picture.

The frequency can be changed via an 8 digits dip switches anywhere on the commercial VHF or UHF TV band (depending on the version) , what makes this PLL TV transmitter different than all the other in the market is the constant +- 1watt output no matter on what frequency you are.

One professional low budget TV transmitter working on all bands

The same unit is suitable for both VHF and UHF. (any channel whose frequency is from 47MHz to 990MHz, and with all the available sound systems

PRICE :  2599$   No discount available

Sound systems are: BG, DK, MN , I, L which are suitable for PAL, SECAM (L only), and NTSC. Starting with v1.04, you may disable the sound subcarrier altogether, for a video-only output.

TV PLL +-1watt
 It is a color video/audio RF modulator / sender transmitter board for home,studios or other professional use (after filtering- we can provide you with a good filter) .

You connect video and/or audio and send it wireless up to 5km (actual distance varies with surrounding conditions,and antenna location. Guaranteed output 900mW negative sync pulse at any channel). The video input can be from a VCR or VCP, a CCTV camera, a video mixer out, etc. It's also ideal for a community TV station or wireless monitoring from a distance, or any kind of surveillance including audio. Reception is on a regular television set on VHF or UHF (any channel whose frequency is from 47MHz to 990MHz). The same unit is suitable for both VHF and UHF.

The most common use is the distribution of VCR/VCP to unlimited TV sets (within the reception range, approximately a 10000m radius from the TV PLL Sender). You can change the RF output channel on the fly. Just go the channel selection ‘menu’ and press the UP or DOWN arrow buttons to go to the next or previous channel, respectively. The transmission channel and its corresponding frequency will be displayed on the 2x8 LCD screen. Starting with v1.04 you can also change the frequency directly by 0.25MHz steps anywhere from 45MHz to 890MHz.

You can change the sound system independently of the channel. This gives a wider range of possibilities.

Possible sound systems are: BG, DK, MN , I, L which are suitable for PAL, SECAM (L only), and NTSC. Starting with v1.04, you may disable the sound subcarrier altogether, for a video-only output.

Another ‘menu’ selection allows toggling the output between RCA Input and TEST mode. TEST mode modulates a two-vertical-bar test screen along with 1 KHz sound that helps tune the TV set more easily.

All settings can be saved internally for next power up.

Price: $2700.00 $1499.00

• Tell a Friend