700 Watt Solid-State

Product Information
Compact lightweight
 Universal mains input
 Mosfet power design
 Harmonic filter
 Double PLL oscillator stability
 LCD  display
 Fan and aluminum cooled
 forward & reflected power
 Audio level control
 RF power control
 VSWR and overheat protection -voltage protection
 Tested to exceed FCC standards

THE 2777 $ USD PRICING IS FOR A VERY LIMITED TIME ONLY.

Our boxed and complete transmitters are a Pro specification FM broadcast transmitters ,they are considered to be one of the most heavy-duty solid-state transmitters in the world. These transmitters are ideally suited and designed for meduim power radio stations. The output power is adjustable from 35 to 700 watts on the 700 watt model.
The Frequency is adjustable from 87.5 to 108 MHz from internal direct reading switches or from the front panel graphics display control system. Setting the frequency internally disables the menu system from changing the frequency ensuring no unauthorized frequency changes.
The FM700 transmitters digital display display on the front panel can indicate frequency, forward and reverse power, power amplifier temperature, power amplifier voltage, PLL board voltage.
The Rear panel contains  balanced inputs with input level control.
 The RF output is via an N type connector. Main input is via a fused swicthable IEC power connector.  
The double oscillator and VFO dual loop PLL system allows perfect audio flatness to below 10 Hz and surprising frequency stability .
The power amplifier is based on modern MOSFET device. A fresh air tunnel through the transmitter keeps cool air running right through the aluminum heatsink. The amplifier is protected from damage by temperature control systems and antenna fault filter voltage to bias (SWR) monitoring and voltage protection.
The power to the amplifier is turned back into the safety zone should a fault occur, keeping you on air rather than shutting down completely and taking you off air. Internal harmonic filtering keeps your RF signal clean and compliant to FCC/DTR standards.
The transmitter contains two fully approved efficient switched mode power supply modules with a a universal input voltage range from 85-260 volts AC, Ensuring compatability of any mains system WORLD-WIDE.
The image transmitters 700 is an attractive all in one broadcast solution for meduim scale stations. Because the exciter, amplifier, power supply are all in one case the price is less than half that of other comparable systems. Designed for the small scale broadcaster and at a small scale price.

PLEASE NOTE THAT THE PRICE OF THIS TRANSMITTER includes an incorporated high performance exciter .

If you want it WITHOUT THE INCORPORATED high performance EXCITER you will save around 450$. it will need an input power of 7w to deliver a full 700w  24/hours output power . PS : E-mail us if you want it without the incorporated exciter : info@imagetransmitters.com 

Specifications

Price: $3499.00 $2777.00

• Tell a Friend